Kishan Brand Steel Body Geared and Ungeared Power operated Shearing Machine are designed for parallel sheet cutting. The machine is applicable to M.S., S.S., Copper, Brass, Aluminium, CRC, CRNGO, P.S.B., etc. cutting industries. It is also applicable to manufacturers of Electric stamping, Automobiles, Tin Drum Barrel, Control panels and Boards, Steel Furniture, Tube light Patties, Fabricators and Kitchenware items, etc.
Side Frames :- Are of Steel Plates designed for maximum rigidity to eliminate deflection and to with stand continuous high speed performance at full capacity.
RAM (Upper Beam) :- Is of solid steel plate and additional ribs on back side the ram adds to its strength, carrying the upper knife. Its maximum weight ensure lesser load on the bearing. The ram moves in accurate machined guide-ways, to avoid deflection for smooth running and maintains the proper strength of the upper knife.
Table :- Is of closed box type steel fabricated, which forms a rigid backbone for the shear and a solid backing for the lower knife. Additional ribs, under the table adds to its strength.
Blade :- Is four edged HC HCR provided for longer tool life.
Crank Shaft and Flywheel Shaft :- Is of best steel, accurately machined and runs in gun metal bearing and all other installed in gun metal bearings.
Hold Down :- Is of steel fabricated spring loaded ensure uniform pressure through out the cutting length without any slipping irrespective to the sheet.
Rolling Key Clutch :- Made of EN-24 steel for positive engagements and continuous operation having three key way. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
Drive :- Is through "B" Belts on the fly wheel and other chain of job cut gears for smooth running and longer life.
Brake :- Constant spring loaded adjustable brake is provided.
Back Guage :- In KSML 5-7 and KSMH 4-7 are screw drive where as in KSUG 1-4 and KSMH 1-3 are of rack pinion type designed to accuracy and easily.
Lubrication :- For sufficient lubrication oil cups and oil points are provided.
|Model||Cutting Cap. In MS Length X Thickness||Stroke per minute||Table Height||Table Width||Front Guage||Rear Guage||Motor HP/KW||Blade Length X Width X Thick||Overall Dimension in MM (APP)|
|Length A||Breadth B||Height C|
|KSUG-1||610 X 1||120||700||250||600||450||1/.75||610X50X12||1200||900||1100|
|KSUG-2||1000 X 1||120||700||250||600||450||1/.75||1000X50X12||1600||900||1100|
|KSUG-3||1270 X 1||120||750||300||600||600||1/.75||1270X50X12||1900||900||1200|
|KSUG-4||1525 X 1||120||750||300||600||600||1/.75||1525X50X12||2150||900||1200|
|KSUG-5||2030 X 1||120||750||300||600||600||2/1.5||2030X50X12||2550||1100||1200|
|KSUG-6||2540 X 1||120||800||350||600||600||3/2.2||2540X50X12||3100||1400||1200|
|KSUG-7||3125 X 1||120||800||350||600||600||5/3.7||3125X63X14||3500||1400||1200|
|KSML-1||610 X 2||55||700||300||600||600||2/1.5||610X63X12||1250||1000||1100|
|KSML-2||1000 X 2||55||700||300||600||600||2/1.5||1000X63X12||1700||1000||1100|
|KSML-3||1270 X 2||55||750||350||600||600||2/1.5||1270X63X12||2000||1500||1200|
|KSML-4||1525 X 2||55||750||350||600||600||2/1.5||1525X63X12||2300||1500||1200|
|KSML-5||2030 X 2||55||750||400||600||600||3/2.2||2030X63X14||2700||1600||1200|
|KSML-6||2540 X 2||55||800||400||600||600||5/3.7||2540X63X14||3200||1600||1200|
|KSML-7||3125 X 2||55||800||400||600||600||5/3.7||3125X63X14||3800||1600||1200|
|KSMH-1||610 X 4||50||750||350||600||600||3/2.2||610X63X14||1300||1400||1200|
|KSMH-2||1000 X 4||50||800||350||600||600||5/3.2||1000X63X14||1750||1400||1200|
|KSMH-3||1270 X 4||50||800||400||600||600||5/3.7||127X63X14||2050||1500||1200|
|KSMH-4||1525 X 4||50||900||450||600||600||5/3.7||1525X75X18||2350||1700||1300|
|KSMH-5||2030 X 4||50||900||450||600||600||7.5/5.6||2030X75X18||2750||1700||1300|
|KSMH-6||2540 X 4||50||900||450||600||600||10/7.7||2540X75X18||3300||1800||1350|
|KSMH-7||3125 X 4||40||900||450||600||600||15/11.2||3125X75X18||3900||1800||1350|